Our meeting this week should have been our annual all day event, usually held on the Saturday following our usual meeting day, this can’t happen due to the ongoing Covid-19 restrictions, this meeting should have been organised and managed by Errol Levings, Earl has put forward a request that you all have a go at making something that has within it’s design a captive ring, and if you are really adventurous try putting more than one ring on. This lends its self well to be included on a goblet or a mushroom but for the ideas, Errol will leave that up to you.
Our virtual meeting on the 8th July 2021 was organised by Errol Levings, Errol’s theme for the meeting was Candlesticks and off centre Candlesticks. Errol had produced a plan along with his instructions on the making of one type of off centre Candlesticks, however it was stated that any sort of Candlestick or Candle holder would be accepted.
Our virtual meeting this week on the 8th July 2021 is being organised by Errol Levings, it’s going to be all about making candlesticks, all types of candlestick, whatever your imagination comes up with, you can go traditional or use nightlight candles or even some of the really fat candles, no matter what as long as you finish up with a candle or candles in your project.
Our meeting on this occasion was our Summer Competition held on the 24th June 2021, it was organised by Peter Lawrence and the subject for the competition was making Natural Edged Turnings. There was no further criteria, you could make anything at all as long as it had some element of Natural Features remaining. There was also no limit on the number of entries any one person could make. Everyone was asked to take part in the competition, and indeed 14 of our number did take part, submitting a total of 54 pictures for the judges to consider. This response was very encouraging as we had more people taking part for this competition than for our Spring competition, so well done to all who took part.
Our meeting this week is Competition time again, the theme for this week’s competition is Natural Edged Turnings, you are all invited to make something with an element of natural edge or inclusion in your turning/s somewhere. There will be no fixed criteria other than it has to have some natural feature/s in whatever you make. There are 3 categories with our members, Novice, Intermediate and Experienced do remember you will only be competing with people in your same category, there is a first prize of £25 for the winner in each category. You should all have received an email already with an entry form attached, if you have not received the entry form contact Geoff Potter and he will see that you get one. You can enter up to 3 different items with a maximum picture number of 5 for each entry.
Our meeting on the 10th June 2021 was to be organised by Peter Lawrence, the theme for the meeting was making Weed Pots , this meeting had to be changed to a virtual meeting due to the ongoing Covid-19 restrictions. However we did ask you all to make a Weed Pot or two and to send some pictures of what you made to me for publication on our club web site, the response was as usual very poor from our membership with only two entries other than that from myself, the entries came from two stalwarts for the club, those being Dave Line and Nick Simpson. We are very grateful to Dave and Nick for supporting the club so diligently but we would very much like to see many more of our members taking part in the virtual scene, this is the only way at present we can keep the club alive, if you don’t take part how can the club survive.
Our next meeting is due to be held on Thursday 10th June 2021, it was to be organised by Peter Lawrence and the subject matter is making weed pots. This meeting has been turned into a virtual meeting due to the ongoing Covid-19 restrictions, that does not mean you do not have to do anything, we would like you all to make a weed pot or 2 and then take some pictures of what you make and send them to me for publication on our club web site, do remember to give me some information on what you made and why, we would all like to see your efforts. The weed pots can be made from any wood, in any shape, laminated if you care to do it, in other words anything you like.
I have given you a couple of pictures of some weed pots I had made in the past, you do not need to copy these, they are there just as an example.
Here are a selection of small weed pots I made some time ago, they are all about 100mm high by 50mm in diameter, with a bunch of dried grasses to set them off.Here I made a matching pair from 6 different woods, these too were about 100mm high by 50mm in diameter.These Weed Pots were some of the entries to a meeting held on the 11th June 2020, as you can see some very different interpretations of what a weed pot can be.
Come on everyone, get busy and make a few weed pots, the more the merrier, you will not be limited to one picture, let me have lots of pictures.
You will have until Friday 11th June 2021 to get your entries to me at,
Our meeting on the 28th May 2021 was to be organised by myself, I chose to demonstrate the making of an Inside-out-turning, as this could not be done in our premises due to the ongoing Covid-19 restrictions I decided to do a time line on the making of an Inside-out-turning. I did ask for you all to contribute something to this meeting but only one lot of pictures have been received, they are on the subject of Inside-out-turning and they came from Dave Line, thank you Dave for taking the time to include your work.
Our next meeting should be on the 27th May 2021, it was to be arranged by myself (Alec Mutch) but due to the ongoing Covid-19 restrictions this meeting has been made a virtual meeting. I was to be demonstrating the making of an Inside-out-turning, something I have demonstrated at the club before. However I am asking you all to have a go at making an Inside-out turning, I have given you a couple of pictures of Inside-out-turnings, the first picture was from a recent competition where John Ruickbie made some Inside-out chess pieces, the other is my usual Inside -out-turning using a miniature bottle of spirt incorporated into the turning.
These were John Ruickbie’s Inside-out-turnings of some chess pieces, they were entered into our spring competition and John took first prize with this entry.This is one of my own Inside-out-turnings, it’s made from Maple with a miniature bottle of spirt trapped inside.
These are just some of the things that can be made using the Inside-out method, this is by no means all that can be made and I’m sure you will use your imagination to great effect and come up with something completely different. Do have a go and let everyone see what can be done, you will have until Friday 28th May 2021 to make and send me your pictures, some text with them would be appreciated.
Our meeting on Thursday 13th May 2021 was to be all about making wooden platters, the meeting was to be organised by myself (Alec Mutch) but due to the ongoing Covid-19 restrictions this meeting had to be changed to a virtual meeting. You were all invited to make a platter or two and send me the pictures of what you had made, the entries were thin on the ground with only 3 members putting forward their work, those were Dave Line, Nick Simpson, Geoff Potter and myself. Those are all regular contributors to the web site and we do appreciate their participation but we would really like to see lots more of you taking part in the online meetings.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish.AcceptRead More
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
